Work Positioning

 Our range of work positioning equipment is designed to make working at height and under difficult circumstances as safe and easy as possible

  • £999.99

    The RGB2 is fitted with buckle and gear loops, and is a work positioning/restraint belt (see the info sheet on restraint vs. fall arrest). This belt is fitted with two side mounted D rings for ease of attachment and the back pad provi..

  • £999.99

    The RGBE is a work positioning/restraint belt, (see the info sheet on restraint vs. fall arrest) and is fitted with only one dee ring attachment mounted at the rear. As with the RGB2, the RGBE is normally used in conjunction with an RGL5 restraint l..

  • £999.99

    The RGP1 is a pole strap/work-positioning device, designed to be clipped to the side dees of a harness or work-positioning belt. The adjuster is easy to use "one handed" either under tension or not. The 16mm hard lay rope is additionally protected by..

  • £999.99

    The RGP4 is a multi purpose work-positioning device, designed to be clipped to the side dees of a harness or work-positioning belt or used independently. The RGP4 can be supplied in a variety of lengths...

  • £999.99

    The RGP11 has been specially designed with a controlled release adjuster buckle to ensure safe operation and adjustment. Double layer abrasion pad protects the strap from damage. Karabiner connected to nylon thimble for ease of operation. Velcro pad ..