Safety Lanyards

Connecting your harness to the anchor point is a crucial link that should never be compromised. Therefore, we offer a range of lanyards to suit your needs, including shock absorbing and work restraint, webbing and rope, single and twin.

  • £999.99

    The RGL9 is a twin lanyard and is supplied in two lengths measured at full expansion, 1.3m and 1.8m. Contains an extra leg to allow movement between anchorage points by means of double clippingThis system is generally used for tower clim..

  • £999.99

    Very popular on the European mainland, the RGL6 is supplied in two lengths measured at full expansion, 1.3m and 1.8m. A general-purpose lanyard used when the operative is working from a static position, connected to a fixed anchor pointThe elastic..

  • £999.99

    The RGL5R is a restraint lanyard, and is supplied in two standard lengths 1.3m & 1.8m to prevent those at risk from a fall. The RGL5R can only be used for Fall Restraint, as there is no shock absorbsion built into the system. If there is an..

  • £999.99

    This restraint lanyard acts as a leash for working at height. The RGL5 can only be used for fall restraint because there is no shock absorption built into the system. If there is any possibility of falling over an exposed edge, or falling through a f..

  • £999.99

    The RGL4 is supplied in a 450mm length and is normally used as an extension strop fitted to the rear D ring of a full body harness.It allows an operative to self-connect to a fall arrest block by extending the attachment point on the harness, an..

  • £999.99

    A twin leg lanyard with the same specifications as the RGL1 BigGuy allowing movement between anchorage points by means of double clipping and ensures continuous attachment. The RGL3 BigGuy is supplied at a length of 1.4m including hooks / karabinersT..

  • £999.99

    The RGL3 is supplied in two standard lengths, 1.3m and 1.8m. The RGL3 is a twin leg lanyard. With the same specifications as the RGL1, the extra leg allows movement between anchorage points by means of double clippingThis system is generally used ..

  • £999.99

    The RGL24 is an adjustable restraint lanyard which ensures that the correct length can be selected for the task in hand. The adjustability of the product ensures that the correct length can be selectedThe 37kN webbing used in the manufacture provides..

  • £999.99

    The RGL20 is usually supplied in two standard lengths: 1.3m and 1.8m excluding connectors. New innovation in safety lanyards, which incorporates inner webbing that will stretch under a constant controlled force thus reducing the impact on the wearer..

  • £999.99

    The RGL2 is supplied in two lengths: 1.3m and 1.8m. Manufactured using a 12mm Kernmantle rope offering excellent wear resistanceFitted with a standard shock absorber pack, but the rope itself also has some shock absorbing capacityThe rope used ..

  • £999.99

    The RGL19 is supplied in two standard lengths: 0.9 - 1.3m and 1.2- 1.8m and is a twin leg adjustable restraint lanyard.The 40kN webbing used in the manufacture provides greater strength compared to other webbing and systemsThe additional benefit..

  • £999.99

    The RGL16 is supplied in two standard lengths: 0.9 - 1.3m & 1.2 - 1.8m and is a twin leg Fall Arrest lanyard; the extra leg allows movement between anchorage points by means of double clipping. Generally used for tower climbing, steel e..

  • £999.99

    The RGL14 is supplied in two standard lengths: 1.3m & 1.8m. The RGL14 Twin Leg lanyard is an industry standard for restraint lanyards, and normally the minimum equipment issued with a harness for working at heightThe 40kN webbing used in the man..

  • £999.99

    The RGL13 is supplied in two standard lengths, 0.9 - 1.3m and 1.2 - 1.8m. The RGL13 is an industry standard, and normally the minimum equipment issued with a harness for working at heightThe 40kN webbing used in the manufacture provides greater st..

  • £999.99

    The RGL12 is an adjustable restraint lanyard, and various lengths are available to act as a leash for an operative working at heightEnsures that the correct length can be selected for the task in handCan only be used for Fall Restraint, as there is n..