Safety Lanyards

 Connecting your harness to the anchor point ...and it's this crucial link that is very often compromised by operators who routinely work in difficult areas, subjecting the lanyard to a variety of abrasive surfaces which may have a detrimental effect. RidgeGear's response is to offer a complete range of lanyards including webbing, rope and chain to ensure maximum choice, flexibility and most important of all safety.All Ridgegear Lanyards are available with any of our Karabiners please ask your local dealer for a price.

  • £999.99

    The RGL1 is supplied in two standard lengths: 1.3M and 1.8M The RGL1 lanyard is an industry standard, and normally the minimum equipment issued with a harness for working at height. The webbing used in the manufacture provides greater strength, we..

  • £999.99

    The RGL1 BigGuy is supplied at a length of 1.4m including hooks / Karabiners. An industry standard, and usually the minimum equipment issued / required with a harness for anyone working at height. We use 37kN polyester webbing to manufacture the lany..

  • £999.99

    The RGL2 is supplied in two lengths: 1.3 M and 1.8 M The RGL2 lanyard is manufactured using a 12mm Kernmantle rope offering excellent wear resistance. The lanyard is fitted with a standard shock absorber pack, even though the rope itself has some ..

  • £999.99

    The RGL3 is supplied in two standard lengths, 1.3 M and 1.8 M The RGL3 is a twin leg lanyard. With the same specifications as the RGL 1 (see data sheet), the extra leg allows movement between anchorage points by means of double clipping. This syst..

  • £999.99

    A twin leg lanyard with the same specifications as the RGL1 BigGuy allowing movement between anchorage points by means of double clipping and ensures continuous attachment. The RGL3 BigGuy is supplied at a length of 1.4m including hooks / karabiners...

  • £999.99

    The RGL4 is supplied in a 450mm length and is normally used as an extension strop fitted to the rear dee ring of a full body harness. When used in this manner, it allows an operative to self-connect to a fall arrest block (RGA1-8) by extending the at..

  • £999.99

    This Restraint lanyard acts as a leash for working at height. The RGL5 can only be used for fall restraint because there is no shock absorption built into the system. If there is any possibility of falling over an exposed edge, or falling through a f..

  • £999.99

    The RGL5R is a restraint lanyard, and is supplied in two standard lengths 1.3m & 1.8m to act as a leash for an operative working at height to be prevented from a risk of fall. It is important to understand the principles of "fall restraint" as..

  • £999.99

    Very popular on the European mainland, the RGL6 is supplied in two lengths measured at full expansion, 1.3 M and 1.8 M A general-purpose lanyard used when the operative is working from a static position connected to a fixed anchor point. If moveme..

  • £999.99

    The RGL9 has a similar specification to the RGL6 (see data sheet), and is supplied in two lengths measured at full expansion, 1.3 M and 1.8 M The RGL9 is a twin leg lanyard, the extra leg allows movement between anchorage points by means of double..

  • £999.99

    The RGL11 is fully approved and used extensively by major utility companies. It can be attached direct to a suitable anchorage point or can be choked around a pole or similar structure. The triple action Karabiner provides quick and safe extra safe..

  • £999.99

    The RGL12 is an adjustable restraint lanyard, and various lengths are available to act as a leash for an operative working at height. The adjustability of the product ensures that the correct length can be selected for the task in hand. It is imp..

  • £999.99

    The RGL13 is supplied in two standard lengths, 0.9 - 1.3 Mtr and 1.2 - 1.8 Mtr The RGL13 lanyard like the RGL1 is an industry standard, and normally the minimum equipment issued with a harness for working at height. The 40kN webbing used in the ma..

  • £999.99

    The RGL14 is supplied in two standard lengths: 1.3 Mtr & 1.8 Mtr The RGL14 Twin Leg lanyard is an industry standard for restraint lanyards, and normally the minimum equipment issued with a harness for working at height. The 40kN webbing used in ..

  • £999.99

    The RGL16 is supplied in two standard lengths: 0.9 - 1.3 Mtr &1.2 - 1.8 Mtr The RGL16 is a twin leg Fall Arrest lanyard; the extra leg allows movement between anchorage points by means of double clipping. This system is generally used for tower ..