Lanyards

  • £999.99

    The RGL1 is supplied in two standard lengths: 1.3m and 1.8m. The RGL1 lanyard is an industry standard, and normally the minimum equipment issued with a harness for working at height. The webbing used in the manufacture provides great strength, wea..

  • £999.99

    The RGL1 BigGuy is supplied at a length of 1.4m including hooks / karabiners. An industry standard, and usually the minimum equipment issued / required with a harness for anyone working at height. We use 37kN polyester webbing to manufacture the lany..

  • £999.99

    The RGL2 is supplied in two lengths: 1.3m and 1.8m. Manufactured using a 12mm Kernmantle rope offering excellent wear resistanceFitted with a standard shock absorber pack, but the rope itself also has some shock absorbing capacityThe rope used ..

  • £999.99

    The RGL3 is supplied in two standard lengths, 1.3m and 1.8m. The RGL3 is a twin leg lanyard. With the same specifications as the RGL1, the extra leg allows movement between anchorage points by means of double clippingThis system is generally used ..

  • £999.99

    A twin leg lanyard with the same specifications as the RGL1 BigGuy allowing movement between anchorage points by means of double clipping and ensures continuous attachment. The RGL3 BigGuy is supplied at a length of 1.4m including hooks / karabinersT..

  • £999.99

    The RGL4 is supplied in a 450mm length and is normally used as an extension strop fitted to the rear D ring of a full body harness.It allows an operative to self-connect to a fall arrest block by extending the attachment point on the harness, an..

  • £999.99

    This restraint lanyard acts as a leash for working at height. The RGL5 can only be used for fall restraint because there is no shock absorption built into the system. If there is any possibility of falling over an exposed edge, or falling through a f..

  • £999.99

    The RGL5R is a restraint lanyard, and is supplied in two standard lengths 1.3m & 1.8m to prevent those at risk from a fall. The RGL5R can only be used for Fall Restraint, as there is no shock absorbsion built into the system. If there is an..

  • £999.99

    Very popular on the European mainland, the RGL6 is supplied in two lengths measured at full expansion, 1.3m and 1.8m. A general-purpose lanyard used when the operative is working from a static position, connected to a fixed anchor pointThe elastic..

  • £999.99

    The RGL9 is a twin lanyard and is supplied in two lengths measured at full expansion, 1.3m and 1.8m. Contains an extra leg to allow movement between anchorage points by means of double clippingThis system is generally used for tower clim..

  • £999.99

    The RGL11 is fully approved and used extensively by major utility companies It can be attached direct to a suitable anchorage point or can be choked around a pole or similar structureThe triple action karabiner provides quick and safe extra safe conn..

  • £999.99

    The RGL12 is an adjustable restraint lanyard, and various lengths are available to act as a leash for an operative working at heightEnsures that the correct length can be selected for the task in handCan only be used for Fall Restraint, as there is n..

  • £999.99

    The RGL13 is supplied in two standard lengths, 0.9 - 1.3m and 1.2 - 1.8m. The RGL13 is an industry standard, and normally the minimum equipment issued with a harness for working at heightThe 40kN webbing used in the manufacture provides greater st..

  • £999.99

    The RGL14 is supplied in two standard lengths: 1.3m & 1.8m. The RGL14 Twin Leg lanyard is an industry standard for restraint lanyards, and normally the minimum equipment issued with a harness for working at heightThe 40kN webbing used in the man..

  • £999.99

    The RGL16 is supplied in two standard lengths: 0.9 - 1.3m & 1.2 - 1.8m and is a twin leg Fall Arrest lanyard; the extra leg allows movement between anchorage points by means of double clipping. Generally used for tower climbing, steel e..

  • £999.99

    The RGL19 is supplied in two standard lengths: 0.9 - 1.3m and 1.2- 1.8m and is a twin leg adjustable restraint lanyard.The 40kN webbing used in the manufacture provides greater strength compared to other webbing and systemsThe additional benefit..

  • £999.99

    The RGL20 is usually supplied in two standard lengths: 1.3m and 1.8m excluding connectors. New innovation in safety lanyards, which incorporates inner webbing that will stretch under a constant controlled force thus reducing the impact on the wearer..

  • £999.99

    The RGL24 is an adjustable restraint lanyard which ensures that the correct length can be selected for the task in hand. The adjustability of the product ensures that the correct length can be selectedThe 37kN webbing used in the manufacture provides..

  • £999.99

    The RTLS1 is a standard tool lanyard with a choke loop for tool attachment. It is suitable for tools up to 3kg in weight. Our Standard lanyards are designed to be our entry level product that does the job perfectly. They are all made from our high..

  • £999.99

    The RTLS2 is a standard tool lanyard with unique detachable choke loops (RTLS2a) for tool attachment. It is suitable for tools up to 1kg in weight. Our Standard lanyards are designed to be our entry level product that does the job perfectly. They ..

  • £999.99

    The RTLS2a is a pack of 3 clip buckle choke loops for tool attachment to be used with the RTLS2 Tool Lanyard. They are suitable for tools up to 1kg in weight. Our Standard lanyards are designed to be our entry level product that does the job perfe..

  • £999.99

    The RTLS3 is a standard tool lanyard with a choke loop for tool attachment and an ‘O’ ring for retention of a tool. It is suitable for tools up to 3kg in weight. Our Standard lanyards are designed to be our entry level product that does the job pe..

  • £999.99

    The RTLS4 is a standard twin tool lanyard with choke loops for tool attachment. It is suitable for tools up to 3kg in weight. Our Standard lanyards are designed to be our entry level product that does the job perfectly. They are all made from our ..

  • £999.99

    The RTLE1 is an elasticated tool lanyard with choke loop for tool attachment. It is suitable for tools up to 5kg in weight. The Elastic range of lanyards is the next step in tool arrest, allowing the user greater flexibility and usability. These a..

  • £999.99

    The RTLE2 is an elasticated tool lanyard with a useful bungee choke loop for tool attachment. It is suitable for tools up to 1kg in weight. The Elastic range of lanyards is the next step in tool arrest, allowing the user greater flexibility and us..